STP Limited
Nehru Place, New Delhi, Delhi
Send E-mail
Send SMS
Home»Our Projects»

Bituminous Waterproofing

Manufacturer of a wide range of products which include shalikote t 32, shalitex primer, bituminous anti-corrosive multi-purpose aluminium coating and shali bond bs & cs.

REQUEST CALLBACK
Ask Latest Price
Bituminous cola applied clay type emulsion
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
ShaliTex Primer is a solvent based bituminous primer that seals pores in
surfaces such as concrete and improves the adhesion of bituminous
materials that are to be applied to the substrate. It is suitable for brush or
spray application. It conforms to the requirement of IS: 3384-1986.
Characteristics
Consistency Brushable &
Sprayable
Setting time at ambient
temperature, hr
24
Theoretical Coverage, L/m2 * 0.30 Service Temperature 5 – 50 OC
Water Content 0.20 %
Specific Gravity 0.90 Flash Point 40 OC Min
* Depending upon surface condition.
Application
• Priming bituminous, concrete or masonry surfaces prior to laying membrane promotes
bonding, whether self-adhesive or otherwise.
• Applied in canal lining joints and concrete floor joints prior to pouring of the bitumen sealing
compound for bonding.
Advantages
• Seal pores on surfaces such as concrete.
• Improves the adhesion of bituminous material that is to be applied to the substrate.
Application Methodology
• Ensure not to apply when temperature is less than 5 OC or during foggy period.
• Before applying the primer make the concrete surfaces free from dust and sand particles by
brooming and allow it to dry. Concrete should be cured and should be eight days old.
• ShaliTex Primer should be thoroughly stirred before use and applied to the substrate by
means of brush, roller or spray at the rate of 0.30 L/m2.
• Allow it to dry for 24 hr.
Health & Safety
• Lid of container should be firmly fixed, when not in use.
• ShaliTex Primer is inflammable and hence keep away from heat.
• Use goggles and hand glove during application.
• Clean hands with warm soap water after application.
Packing
Available in 20 L & 200 L drum.
Storage
Keep in cool and dry place, in air tight container, under shed, away from heat.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Bituminous Anti-Corrosive Multi-purpose Aluminium Coating

Description
SuperSilverShield® is an anti-corrosive, water proofing paint with
aluminium finish, It is composed of oxidised bitumen, volatile solvents and
specially formulated aluminum compound.
Characteristics
Consistency Smooth , Uniform,
Brushable
Finish Silver
Drying Time, hr 5
DFT per coat 30 to 40 Micron Specific Gravity 0.96
Application
SuperSilverShield® is used as a protective coating on iron, steel, masonry and other surfaces. It
is used to reflect UV rays and protect bituminous waterproofing felts and fabrics, while giving a
visually pleasing finish. It covers, in normal conditions,
??? 9 to 11 m2/L when applied over metal and old painted surfaces.
??? 7 to 9 m2/L when applied over bituminous surfaces.
??? 5 to 7 m2/L when applied over brick masonry and concrete.
Advantages
??? Deflects UV rays and prevents degradation of membrane arising out of exposure to sunlight.
??? Reduces heat radiation inside the buildings and thus provides a little insulation from
atmospheric temperature.
Application Methodology
??? SuperSilverShield® is to be stirred well before use to ensure thorough dispersion of
aluminium for a uniform finish.
??? Loose dust should be brushed off and surface should be dry before application.
??? Undercoat is not necessary for its application. It can be applied over old painted surfaces
without burning off or scraping, provided the old surface is not in a flaky condition.
Health & Safety
??? Lid of the container of SuperSilverShield® should be firmly fixed, when not in use.
??? It is inflammable, keep away from any naked flame during application and storage.
??? Use goggles and hand gloves during application.
??? Clean hands with warm soap water after application.
Packing
Available in 20 L drum.
Storage
Store in air tight containers in cool, dry place, under shed, away from heat and moisture.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Cold Applied Bituminous Adhesive for Fixing Roofing Felts

Additional Information:
  • Minimum Order Quantity: 100 Kilogram
Yes! I am Interested
 
X

Download Brochure
STP Limited

Dilip (Manager)
707, Chiranjiv Tower 43, Nehru Place
New Delhi - 110019
Delhi, India
Send Email
© STP Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited