STP Limited
Nehru Place, New Delhi, Delhi
Send E-mail
Send SMS
Home»Our Projects»

Insulation

 

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

ShaliXPS® extruded polystyrene rigid board is a high performance insulation material with a proven
track record facilitating considerable saving of electricity, thus facilitating green building concept.
ShaliXPS® can be used widely for various climatic conditions. It has been successfully used for a
varied range of temperature and under high humid condition in various part of the country.
ShaliXPS® has a high compressive strength to enable it to use it for over deck, floor,
machine/plant room, etc.
The high thermal resistance property of ShaliXPS® is a result of arresting / millions of tiny
closed air cell separated from each other in a unit block.
ShaliXPS® is having a skin formed on top and bottom faces facilitating protection and providing
excellent barrier to absorption of water, moisture, dew.
ShaliXPS® keeps its R (Resistivity or Resistance to heat flow) value retained even after its long
exposure to high humidity, ground water, freeze thaw cycle and other extreme climatic conditions.
It conforms to ASTM C 578 – Type IV.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

ShaliCryl® LM HI is a single component highly elastomeric UV resistant, heavy duty monolithic,
water based waterproofing liquid membrane system. ShaliCryl® LM HI has high mechanical
strength, elastic and resilient acrylic polymers, selected fillers, light fast durable pigments,
microfibers and additives which imparts excellent weather resistance.
The latest ceramic micro technology provides solar energy reflecting property enhancing cooling
effect inside rooms. The microspheres in the coating reflects most of the solar energy back to the
atmosphere, which only allows very little radiation energy to penetrate through roof.
Low thermo-conductivity of the fillers and microsphere provides very effective thermal insulation
Application
• Effective heat insulation coating for both horizontal and vertical surfaces.
• Provides seamless elastic film over building roofs / terraces –flat, slope and or inclined.
• Waterproofing of roof terrace including corrugated roof, slabs, chajjas, balconies, parapet
walls.
• Being liquid, suitable for waterproofing of complicated geometrical structures like domes,
arches, paraboloids, and steeps rising on flashings.
• Very effective for crack repair in cementitious surfaces and waterproofing of vertical wall
surfaces and over existing cementitious waterproofing treatments like brick-bat coba,
concrete screeds, acrylic coatings etc.
Advantages
• User friendly, easy to apply, environmentally safe and non-polluting.
• Resistant to UV, Abrasion & dirt pickup.
• The film can be washed with water after complete drying.
• Excellent heat insulation property which reduces the considerable room temperature.
• Very good coating for energy saving purpose.
• Forms high mechanical strength, elastic & resilient coating enabling it to withstand structural
movements.
• Higher tensile strength, tear resistance & bond strength with cementitious substrate.
• No additional protective coating is required for roof subjected to normal foot traffic.
• Can be coated on both sides of the roof top and ceiling to have better effect.
• Considered to be a Green Product.
Application Methodology
• Clean surface of all loose gravel, dirt and foreign particles with high-pressure wash. Before
application surface should be totally dry, free from moisture, oil, grease, mill scale or rust.
• Do not apply during rains.
• Prior to application, repair torn flashings, loose brick, faulty covings of parapet walls to provide
even surface. Large blisters and surface breaks shall be slit and opened for the release of
entrapped moisture then repaired with ShaliCrete URP wherever necessary.
• In case of old terraces with brick-bat- coba / screeds, ensure that substrate is firm and sound.
Repair damage / hollow portions, sharp edges with ShaliFix RM C. Surface cracks must be
filled with PlastiSeal or ShaliSeal CPM in case of wider cracks.
• Bitumen based waterproofing treatments must be completely removed by mechanical
scarification or by any other effective mechanical method.
• Apply one coat of ShaliPrime WB allow it to dry for 2 - 3 hr.
• Apply first coat of ShaliCryl® LM HI @ 415ml /m2. Place one layer of ShaliGeoText40/50gsm
when the coat is still wet.
• Apply second coat of ShaliCryl® LM HI @ 415 ml / m2 and allow it to dry.
• Finally apply the third coat of ShaliCryl® LM HI 415 ml / m2 to get a 1 mm dry film thickness.
• For vertical wall apply ShaliCryl® LM HI @ 210 ml / m2/ in two coats over primer coat to get
300 plus micron DFT.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Single Component Free Flow Non-shrink High Strength / Fluidity Grout
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Sinvle Component Free Flow Non-shrink High Strength / Fludity Grout
Yes! I am Interested
REQUEST CALLBACK

Product Price: Get Latest Price

ShaliKote CT is an excellent anti-corrosive solvent free type protective material, recommended
where a better surface finish is desired. It has excellent adhesion, waterproofing and resistance
against sea-water, oil and various chemicals. It is better than petroleum asphalt tar.
Ask Latest Price
Yes! I am Interested
X
 

Download Brochure
Explore more products
ShaliKote C
Get Best Quote
Shali Prime SM
Get Best Quote
Bitumen 20/40
Get Best Quote
ShaliMastic EHD
Get Best Quote
ShaliCure SS
Get Best Quote
ShaliHCO
Get Best Quote
STP Limited

Dilip (Manager)
707, Chiranjiv Tower 43, Nehru Place
New Delhi - 110019
Delhi, India
Send Email
© STP Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited