STP Limited
Nehru Place, New Delhi, Delhi
Send E-mail
Send SMS
Home»Our Projects»

Other Epoxies

Our range of products include shalimastic ehd, shali poxy 400, shalicure ss, shalihco, shalislip and cold bonding adhesive.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

ShaliMastic®-EHD is two component thermo-setting anti-corrosive Epoxy polyamide coating
based on specially processed coal tar pitch. Once applied, it cures to form a hard, heavy barrier
against effects of soil stresses, abrasion, chemical and fungal attacks and other corrosive
agents. It is a High-build, polyamide cured Coal Tar Epoxy.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Two Component High Solid Food Grade Epoxy Coating
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

ShaliCure® SS is a sprayable sodium silicate based compound for curing and sealing concrete.
ShaliCure® SS is used on all new concrete surfaces. It conforms to ASTM C 309.
Characteristics
Physical Appearance Milky white liquid Theoretical Coverage
Fresh Concrete, m2/L*
8
Specific Gravity 1.24 + 0.02
* Depending upon surface condition.
Application
• Curing and sealing over concrete.
Advantages
• Seals, hardens and cures simultaneously.
• Water based. Green products.
• Resists penetration of oil and chemicals and salt effects.
• Can be tiled over.
• Facilitates direct application of subsequent treatment like waterproofing, painting and anticarbonation
coating.
Application Methodology
􀂾 Surface Preparation
• Concrete surface must be clean and free of standing water. Remove any sealer or other
material that may prevent absorption of the ShaliCure® SS.
􀂾 Material Preparation
• Stir ShaliCure® SS by a slow speed mixture (approx. 400 rpm) fitted with a suitable
mixing paddle to ensure a homogenous mix.
􀂾 Application of Material
• Apply ShaliCure® SS to a concrete surface in a continuous film. Best results will be
achieved with a hand or power sprayer although a soft bristle broom or squeegee. Brush
may also be used. Brush out all sagged material immediately. Concrete abrasion
resistance increases with additional coats of ShaliCure® SS.
Cleaning Maintenance
• Clean brushes, tools, equipment and flush sprayer with potable water immediately after use.
Limitations
• Protect ShaliCure® SS from freezing. In the event of freezing, thaw, stir or agitate before
using.
• Protect metal, glass, wood, paint or brick from contact with ShaliCure® SS. If accidentally
misapplied, wash surface with potable water immediately.
• If excess ShaliCure® SS is left on the concrete surface, a white residue may form.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

ShaliHCO® is a black / brown oily liquid with an aromatic odor. ShaliHCO® is a distillate of coal tar
and is produced by high temperature carbonization of bituminous coal. ShaliHCO® is heavier than
water. ShaliHCO® is miscible with alcohol, ether, volatile oils, and in solutions of alkali hydroxides.
ShaliHCO® is soluble in dimethyl sulphate and practically insoluble in water. Its constituents are
liquid and solid aromatic hydrocarbons, tar acids, and tar bases.
It conforms to IS :218.
Characteristics
Density, 20 OC, g/cc 1.085 Water content, % 0.2
Crystallisation Point OC 21 Water Extractable Phenol, % 0.4
Boiling Range, %, OC
• Distillate Up to 235
• Distillate Up to 300
• Distillate Up to 355
17
58
87
Toluene Insoluble, % 0.8
Flash Point, OC 86
API Gravity 0.95
Calorific Value, Cal/g 8754
Viscosity Index 95 Liquidity, 32 OC Clear free flowing
material without
slurry and solids
Viscosity, cPs 13.2
Viscosity BMCI 145
Application
• Carbon Black Feed Stock (CBFS).
• Solvent in paints and coatings.
• Fuel oil, particularly for metallurgical furnaces boilers at ambient temperature above 21 OC.
• Wood preservative in railroad ties, railway wooden sleepers, poles, Fence posts, marine
pilings and other outdoor applications.
• Dye Intermediate.
• Lublicant for die moulds.
• External antiseptic, disinfectant.
• Fungicide, insecticide repellent.
Advantages
• Easy to apply.
• Free flowing liquid.
Application Methodology
• All sawing, cutting, framing and shaping should be done before immersing the timber.
• Apply ShaliHCO® generously in 2 / 3 coats at minimum 12 hr intervals.
• First immersed timber in a tank of solution heated up to 65 OC for 1-2 hr. Then transfer to a
tank of cold solution.
• This treatment can also be done in the reverse order.
• Impregnated timber with 5 L or more of ShaliHCO® solution / cft.
Health Safety
• The product should not come in contact with the skin and eyes, or be swallowed.
• Wear suitable protective clothing, gloves and eye protection.
• In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and
water. Do not use solvent to clean the contacted area.
Yes! I am Interested
REQUEST CALLBACK

Product Price: Get Latest Price

Description
ShaliSlip is shuttering oil / concrete form release agent that provides quick, easy and clean
release of concrete from forms. It provides a smooth, flat surface, free of voids and defects. It will
not transfer from forms and it leaves concrete surfaces unstained, ready for re-use almost
instantly.
Characteristics
Physical Appearance Yellowish brown low
viscous liquid
Theoretical
Coverage
1 Ltr will cover approximately
20 to 36 m2 of forms
depending upon application
Specific Gravity 0.83 + 0.02 method and substrate.
Application
• Can be applied on metal, wood, plastic and fiberglass forms.
• Precast moulds plywood.
• Equipment maintenance-scoots, buckets hoist and paving machines.
Advantages
• Acts as bond breaker and form cleaner.
• Eliminates voids, defects, build-up of concrete and mortar provides fair finished exposed
concrete.
• Non-staining will not wash off.
• Protects steel forms from rusting.
• Cuts clean-up time.
• Economical easy to use.
• Protects plywood forms from bulging due to water absorption, thus increases the number of
re-uses.
• Stripping of forms / de-shuttering becomes easy without hooking, thus increases shutter’s life.
Application Methodology
• Remove dust, flakes, or other foreign particles by jet or dry air and clean the surface
mechanically or with wire brush to ensure removal of loose rust particles.
• Stir the container well for removal of settlement, if any.
• Use ShaliSlip directly from container.
• Apply brush, roller or pump-up type sprayer. Coated forms may be used ½ hour after
application of ShaliSlip.
Cleaning Maintenance
Clean tools and equipments with solvent such as xylene, acetone or toluene.
Health Safety
• Use mask, nose cover and hand gloves during application.
• Clean hands with soap water after application.
• Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with
plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice.
Do not use solvent to clean the contacted area.
Ask Latest Price
Yes! I am Interested
REQUEST CALLBACK

Product Price: Get Latest Price

ShaliBond S is a two component, solvent free, thixotropic, structural adhesive especially
formulated for segmental bridge construction. ShaliBond S meets the requirements of FIP and
ASTM D 648.
Characteristics
Colour
• Component A
• Component B
• Mix
White
Black
Concrete grey
Compressive Strength @ 15 OC
• 24 hours
• 7 days
>50
>70
Pot Life @ 30 OC, minutes 30
Heat resistance, @ 50 OC
(Shear stress), MPa
12.9 Substrate Temperature, OC
• Minimum
• Maximum
15
Shear Strength, N / mm2 > 12 35
Open time @ 30 OC, minute 60 Mix Density, Kg / L 1.90
Theoretical Coverage L / m2 * 2 L at 2 mm Sag Flow, mm 3
Shrinkage Nil Tensile strength Concrete
Heat Deflection, OC > 50 failure
* Depending upon surface condition.
Application
• Segmental bridge adhesive.
Advantages
• High strength and high modulus of elasticity.
• High initial and ultimate strength.
• Impermeable to liquid and water vapour.
• Suitable to dry and damp concrete surfaces (moisture tolerant).
• Hardening is not affected by humidity.
• Thixotropic:non sag in vertical and overhead application.
• Solvent free.
• Hardens without shrinkage.
• No primer required.
• Good chemical resistance.
Application Methodology
• Ensure that the surface is free from dust, vegetation, debris, oil residue, and is sound and fully
cured.
• Ensure that concrete should be cured for at least 28 days, (depends on minimal requirement
of strengths) and have an open textured profile. Any cement laitance should be removed and
free of all loose or friable particles with a minimum compressive strength 25 N/mm² and a
minimum pull off 1.5 N/mm².
• Add Component A to Component B at 2:1 ratio by weight and mix thoroughly for 3 minutes
until homogeneous mix is achieved, using a slow speed drill (500 - 600 rpm) fitted with a
suitable mixing paddle.
• Apply ShaliBond S on prepared surface with a spatula, trowel, notched trowel or with hands,
protected by gloves.
Ask Latest Price
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK

Product Price: Get Latest Price

ShaliKote CT is an excellent anti-corrosive solvent free type protective material, recommended
where a better surface finish is desired. It has excellent adhesion, waterproofing and resistance
against sea-water, oil and various chemicals. It is better than petroleum asphalt tar.
Ask Latest Price
Yes! I am Interested
REQUEST CALLBACK

Product Price: Get Latest Price

ShaliKote CT is an excellent anti-corrosive solvent free type protective material, recommended
where a better surface finish is desired. It has excellent adhesion, waterproofing and resistance
against sea-water, oil and various chemicals. It is better than petroleum asphalt tar.
Ask Latest Price
Yes! I am Interested
REQUEST CALLBACK

Product Price: Get Latest Price

ShaliKote CT is an excellent anti-corrosive solvent free type protective material, recommended
where a better surface finish is desired. It has excellent adhesion, waterproofing and resistance
against sea-water, oil and various chemicals. It is better than petroleum asphalt tar.
Ask Latest Price
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK

Product Price: Get Latest Price

ShaliPoxy CTE A is a self priming, two-component Coal Tar Epoxy coating, black in colour, used to
protect steel, concrete structures, timber and other construction materials in corrosive environment.
It is an excellent abrasion resistant anti-corrosive coating system.
Ask Latest Price
Yes! I am Interested
REQUEST CALLBACK

Product Price: Get Latest Price

ShaliPrime SSC (earlier known as ShaliJet Primer) is a solvent based Coal Tar primer that seals
pores in surfaces such as concrete and improves adhesion of Coal Tar materials to substrate.
Ask Latest Price
Yes! I am Interested
REQUEST CALLBACK

Product Price: Get Latest Price

ShaliPrime CT is suitable for priming concrete / metal surfaces prior to the application of any coal
tar based epoxy floorings / coatings. ShaliPrime CT has good penetrative properties and is
suitable for wall priming prior to plastering, particularly in basement, to prevent dampness.
Ask Latest Price
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK

Product Price: Get Latest Price

ShaliKote CT is an excellent anti-corrosive solvent free type protective material, recommended
where a better surface finish is desired. It has excellent adhesion, waterproofing and resistance
against sea-water, oil and various chemicals. It is better than petroleum asphalt tar.
Ask Latest Price
Yes! I am Interested
X
 

Download Brochure
Explore more products
Shali Plast PCE
Get Best Quote
Tar Felt BH
Get Best Quote
Shali Poxy CTE HB / LB
Get Best Quote
Shali Urethane FG
Get Best Quote
Shali Poxy CTE A
Get Best Quote
STP Limited

Dilip (Manager)
707, Chiranjiv Tower 43, Nehru Place
New Delhi - 110019
Delhi, India
Send Email
© STP Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited